Parts By Moped

Parts By Category


  Home > Engine Parts >

Puch E50 High-Torque Engine
Puch E50 High-Torque Engine

Alternative Views:

Our Price: $249.99

Stock Status:(Out of Stock)
Product Code: L000176

Cleaning and Polishing

(u) Clean carb internally and externally prior to shipping and pre-adjust settings [Add $12.00]
Used Engine Options

(b) Ships without carburetor [Subtract -$25.00]

(a) Ships without flywheel cover [Subtract -$5.00]If you already have or are planning on running your moped without the cover or you have a good existing one, you can choose to not have it shipped with the engine

(a) Ships without Front Sprocket [Subtract -$4.00]If you don't need the front sprocket we can remove it and credit your purchase prior to shipping

(a) Ships without the ignition or flywheel [Subtract -$30.00]If you plan on using your current ignition and flywheel or you plan on converting to a CDI type of ignition, you can purchase this engine with the magneto removed. (points, stator, generator coils, condenser and flywheel.

(a) Ships without top end [Subtract -$35.00]If you plan on kitting the engine you can have it shipped to you without the piston, head or cylinder

Complete used running vintage Puch single speed 49cc 2 stroke moped engine from 1978 Maxi-Luxe. This engine will fit all single speed Puch powered mopeds including Sears Free Spirit, JC Penney Pinto and Swinger models and Murray.

This 2 hp engine features a cast iron sleeved high-torque cylinder assembly, 12 mm Bing carb, 6 wire Bosch magneto, 2 shoe clutch and a Bosch HT coil. While the cylinder was off being inspected, we installed new rings and honed the cylinder.

This engine will need to have the carb thoroughly cleaned, ignition serviced and timed and a new spark plug installed before using.

If you don't need all the components like carb, magneto or cylinder, you can choose the options to have them removed prior to shipping which will also save you money on the purchase price.

Please note before purchasing: This is a used engine and is being offered without any kind of guarantee or warranty.

We have tried to provide the most accurate and descriptive information available at the time of posting. All used engines are inspected by us to help ensure that you receive a quality used engine but we can not be 100% certain of the engine internals, bearings, seal, gaskets, rings, bushings, clutch surfaces, etc. If we state the engine came off a running moped, it means that the engine started, idled, and propelled the rear wheel without noticeable or obvious mechanical issues.

Engines are inspected for:

  • Damaged cylinder walls, gouged piston surfaces and broken rings
  • Connecting rod vertical play
  • Crankshaft lateral and vertical play
  • Crack, damaged or altered cases
  • Transmission play and friction
Other components when included like carbs, clutches, variators, magnetos and ignition have also been visually inspected but are also offered without implied guarantee or warranty